Best Wood Material For Drawer Boxes

 If you’re searching for the best wood material for drawer boxes you might be a new cabinet installer, a homeowner, or a general contractor trying to make decisions about what drawer boxes to order. Whether it is a new build or you are remodeling a kitchen choosing quality parts such as drawer boxes is important.  The quality you choose to install will speak to the durability and quality your company installs, or you chose to install in your own home.

Choosing The Right Wood

The wood workers that make cabinetry using hardwood that is more expensive and attractive have their uncertainties when it comes to what they should use for the construction of the cabinetry drawers. They will be overwhelmed with thoughts such as, “should the back, bottom, and the interior sides, of the drawers be made from the same material as the cabinet and drawers? The drawer sides would match with the front of the drawer, as well as the rest of the cabinet, it would certainly be a uniformed look, but would it be too much and over stated?

Cherry Wood Is Expensive

However, when building drawers in this matter it may be an advantage to use different types of wood. The first reason is that hardwood like cherry and fine maple will be very expensive. If it was going to be for a rather large project, such as a wall entertainment center, the cost will quickly add up. The second reason is that it is usually difficult to fine cherry and some of the other hardwoods in veneer plywood. Which also means that the bottom pieces of the drawers would have to be glued together from a stock pile, and would consist of a lot of time.

Lastly, it could end up being a stylistic advantage to use wood for a contrast on the sides of the drawers. For the drawer box, a light colored wood such as poplar, made into half-tailed dovetails for instance, would show the workmanship off.

Best Wood For Drawer Boxes

An excellent choice for the construction of drawers is maple. Maple drawer boxes are an excellent option for a number of reasons. This is because it is stable, less expensive than most other hardwoods, and its durable. It also blends very well with a birch plywood, which would be used for drawer bottoms.

Ultimately it is up to each contractor, cabinet installer, and homeowner to decide which material fits the project better for quality, durability, and budget.  Use this information as a guide to understanding your options and choose wisely.

Here are two reasons that plywood is used and not solid wood:

  • The use of plywood only consists of cutting for the final dimensions, jointing together, and finalizing it down to size.
  • No longer than what they will be looked at when opened it is not necessary to worry about whether or not they are made of solid wood.

Order The Best Wood Drawer Boxes

If you are building or remodeling cabinetry in a bathroom or a kitchen and need new drawer boxes, we are your source for the highest quality at the best prices.  We ship nationwide in the United States and are proud to fabricate your drawer boxes right here in America.

Shop: Dovetail Drawer Boxes – Shop: Dowel Drawer Boxes

How To Fix A Broken Drawer Slide

If you’re searching Google for “How to fix a broken drawer slide” you’ve got a drawer that isn’t opening smoothly, is rubbing against the frame, or is just simply stuck.  The drawers in our kitchens are used, abused, and relied upon to hold everything we need.  Older hardware might have small wheels, flimsy construction, worn out bearings or rollers, and need repair.  There are replacement drawer slides made for virtually every imaginable drawer and cabinet design.

Types Of Drawer Slides

There are 3 basic designs built by many manufactures in different materials.  The three main types are side mount, bottom mount, and bottom mount single.

Side Mount Drawer Slides

Side-mount drawer slides are mounted on the side of the drawer box and telescope out to allow the drawer to extend further than a bottom mount drawer slide.  These drawer slides are generally rated to handle more weight and are attached either half way up the side of the box, or at the bottom.  To know for sure which design you have, if it doesn’t telescope, it isn’t a side mount drawer slide.

Bottom Mount Drawer Slides

Bottom Mount or Under Mounted drawer slides are one of the most common types of drawer slides.  As the name suggests the slides are mounted to the drawer and cabinet under the drawer on a track. There are two common configurations of bottom mount drawer slides, one is flat and attaches at the side, the other is bent at 90° and fits over the edge of the drawer.   The key element to knowing which you have is if the track attaches to the bottom of the drawer, or not.

Bottom Mount Single Drawer Slides

In some cases a bottom mount single drawer slide would have been selected for your kitchen.  It is a economy version of a bottom mount drawer slide and features a single centered mount for the drawer to attach to the cabinetry.  Some have a corresponding track, while others just have a wheel that fits into the track. Typically this is a mount used for inexpensive cabinetry and has lightweight drawers.

Adjust Before Replacing Drawer Slides

If you are experiencing issues with your drawers there might be an easy fix.  Drawers open smoothly when the slides are adjusted correctly.  Over time and with use they might come out of alignment and a simple adjustment may return your drawer slides to perfect working order.  Drawer slide adjustments are done via oval shaped screw adjustments found at the back of drawers.  Fit your slides or wheels into the cabinet and slide the drawer in the cabinet and move it back and forth a few times.  If you notice it is too tight, rubs the side, or sticks you should loosen the screws and tap the drawer in whichever direction will resolve the sticking or rubbing. Once your drawer will slide in and out smoothly you should re-tighten the screws.

How To Replace Tracks & Drawer Slides

To replace your slides and tracks you need to identify the type of slide you have, make sure you either identify what size you have or measure, and then disconnect the drawer and replace the hardware.

Measure Twice, Buy Once

Before ordering new drawer slides make sure you know what type you have and what size you need.  Most times the length is stamped on the side of slides.  If it isn’t make sure you measure it and replace it with a slide of the same size.  This saves wasted time, money, and frustration.

Slide Labeling

Drawer slides sold today carry labeling for installation.  After you’ve removed your old hardware inspect your new slides for stamps.  You will find markings DL (drawer left) AND DR (drawer right). You will also see pieces that connect your drawer to the cabinetry marked with CL (cabinet left) and CR (cabinet right).

How To Disconnect Slides

Side mount slides have a tab or lever which will release the drawer typically located about halfway down the side of the drawer when in the open position. Bottom mount slides generally just pull out by jiggling the drawer, tilting it slightly, and in some cases might have a tab that needs to be pushed to release it from the track.

Drawer Slide Replacement Steps

Follow these drawer slide replacement instructions step by step to make replacing your drawer slides a breeze.  Replacing the drawers is pretty straight forward, remove old, install new, and ensure the adjustment is perfect.

Step 1 – Remove Drawer & Old Drawer Slides

Take the drawer out of the cabinet by removing all of the screws.  Make sure you buy new slides of the same design and have openings that match the size and position of the screws.  It saves a lot of effort if you use a handheld power tool to remove the hardware.  Ensure that you set the tension lower when reattaching your screws to prevent splintering of your drawers.

Step 2 – Match Up New Slides & Attach

Take your new drawer slides out of the packaging and read the labels to sort them into sets of right and left hardware.  Attach your tracks and slides to the cabinets and drawers with your driver with the screws that came with the new hardware.  Make sure you don’t over tighten the adjustment screws which are located at each end.  Place screws in these areas but don’t tighten them down.

Step 3 – Install New Drawer, Test, Adjust

Slide the drawer into and out of the cabinetry and pay close attention to if it is straight, rubbing anywhere, or if it is sticking.  If so make sure you loosen the adjustment screws in the oval shaped holes and tap it in the direction which will resolve the problem.  Always test and adjust until the drawer slides easily and smoothly, then tighten down your adjustment screws.

Buy New Drawer Slides & Drawer Boxes

If your drawer slides are worn out or you need new drawer boxes DC Drawers is your source for high quality drawer slides, and the best drawer boxes.  We offer the top brands of new and replacement drawer slides and custom made drawer boxes.  In addition we offer in drawer power outlets and many other cabinet drawer convenience options.

Shop: New & Replacement Drawer Slides

Are Knobs or Pulls Better for Your Kitchen Cabinets?

Are knobs or pulls better for your kitchen cabinets?  While it might seem like small detail, the details matter for well designed kitchens.  Not only will the choice of hardware affect the look of your kitchen, one choice may be more ergonomic.

The Kitchen Is A Gathering Place

Your kitchen is the main part of the home and many people consider it the most vital part of a house. You probably start your day off with coffee or a quick meal in the kitchen with your family. Everyone seems to gather together to socialize in the kitchen and it is where your meals are cooked and eaten together. Kitchens are a bonding area of your home. Whenever you, your family or guests are attracted to your kitchen and they want to spend time in it, you know your kitchen is a success.

Having a great looking and functioning kitchen is well worth the investment in the health and happiness of your family, so that means that all the little details do matter. Whenever you are designing your kitchen, you will normally start with the appliances and cabinets and from there everything is personalized with pulls, knobs, corbels or aprons. There is a lot of hardware to consider and often times the smallest will make a big impact.

Importance of Kitchen Cabinet Pulls and knobs

A small detail in your kitchen will be the knobs and pulls that are on your drawers and cabinets. The hardware that you pick out shouldn’t be something that you forget in the process of updating or remodeling. Cabinet pulls and knobs aren’t always considered like they should be, but the style that you pick can really impact the feel of your kitchen space. The hardware is just as important as your cabinets.

Shape, Style, Finishes

When you begin to shop around for your pulls and knobs, you will certainly found out that there is a huge selection of shapes, styles and finishes. For instance, modern styled pulls will pair well with cabinets that are in a modern kitchen that give sleek essence of elegance in the space. If you are wanting to have an old world feel, then using antique styled knobs could be what you are needing to compliment the décor. It could be a bit overwhelming when you are coming to the topic of knobs versus pulls, but is a choice that will deserve your time and consideration.

After you have selected new cabinets as well as appliances for the kitchen, the last thing that you want have to do is deal with the hardware, which is why many people don’t think too much about pulls and knobs. Most people also know that their kitchen space needs to be updated, but they don’t want to throw thousands of dollars into a remodeling project. Luckily, just swapping out the pulls and knobs can make a big difference in how your kitchen looks and you will spend only a fraction of the cost that comes with a renovation.

Knob & Pull Costs

The cost of knobs and pulls will vary, depending on which option you go with. Knobs can start at a couple of dollars for one but if you choose a high end option like a knob that happens to be made of unique Swarovski crystal, it could hundreds of dollars.

Pulls are normally more expensive than a knob because they are much larger, but just like knobs there are a variety of prices that will depend it on the option picked. Normal kitchen cabinet pulls start a couple of dollars but if you are looking for embellished antique bronze options then you are looking at hundreds of dollars. Cup pulls are going to be more expensive to start with, but the less expensive options start at about $7.

Guidelines for Picking Kitchen Cabinet Pulls and Knobs

It is vital that you pick hardware that will compliment your kitchen décor and accentuate the features. Normally people just want the hardware to coordinate with the handles on the appliances. The colors need to work well together and the finishes shouldn’t clash at all. Different shapes can make your kitchen feel cluttered and you should use your personal preferences and functionality to choose if you should go with a pull or a knob, but there are a few guidelines that you need to follow that will work with your cabinet style.

Shaker Style Cabinets

This is the most common style of cabinet and it will give you flexibility with the design and they work with bin/cup pulls or knobs. Shakers are known for being simple and having clean lines, so simple hardware such as round knobs are often used.

Traditional steel or nickel knobs or pulls are very common as well as ceramic of vintage glass knobs. Vintage pulls that have exposed screws give an industrial or classic feel to a new kitchen that has these cabinets. Tubular pulls which may be long or short will often modernize traditional kitchens which these types of cabinet. Flat bar pulls will give it a contemporary edge while a wire pull will make it more traditional. Footed or arched bar pulls will give it a classic look to a shaker cabinet.

Flat Paneled Cabinets

Most often these cabinets are seen in contemporary or modern kitchens. They embrace minimal embellishments to focus on natural materials. Using subtle hardware pieces are best like stainless steel bar pulls. You will often see extended, long versions on drawers or doors.

If you are one to prefer square edges, you can pick a flat bar pull. A recessed pull will offer you functional options that work well for kitchens with a lot of traffic. If you are looking for a minimalist look, then you may think about discreet tab pulls for flat styled cabinets.

Inset Cabinets

An inset cabinet will give you inset, flush doors that have an edge detail that shows craftsmanship. Most inset cabinets will have exposed hinges, which will give you something to consider as many people prefer pulls or knobs to match the hinges. Both knobs and pulls are paired with an inset cabinet.

Distressed Cabinets

Using rustic hardware will pair nicely with a distressed cabinet look. You should consider adding back plates for unique Mediterranean style or antique or rustic knobs or bronzed pulls.

Louvered Cabinets

Both knobs and pulls will work with a louvered cabinet, but knobs are quite common. You should keep in mind that a louvered cabinet will have more details than a solid, plain cabinet. There is more to look at, so they will require more attention, which is why people pick classic or simple pulls and knobs to compliment the cabinets.

Beadboard Cabinets

These cabinets will give your kitchen a cottage chic type of look, which goes nicely with cup pulls or knobs. Similar to louvered cabinets there is more details to look at, so simple hardware will work best. Adding elaborate hardware would be too distracting and take from the character of the beadboard.

Your Kitchen, Your Style

You should really pick your hardware based on your personal preferences, goals for functionality and kitchen style. If you have a concern about your resale value, and you recognize that most popular hardware finishes are bronze, satin, and nickel. There are also aren’t hard set rules that you need to follow when it comes to adding final details to the kitchen and most people just pick a combination of pulls and knobs. If you aren’t sure about what you should pick, it is best to check out the pros and cons.

Knobs or Pulls – Pros and Cons

The choice between knobs and pulls isn’t that easy as both have positives and negatives. You should keep in mind that you will be using them every day. Whatever you pick, should feel natural in your hand and flow with the décor of the kitchen. You need to consider the look you are wanting, your budget, the décor and style of the kitchen, ease of use, weight of drawers and ease of cleaning as well as other things.

Everything you need to know about knobs

Knobs are a basic kitchen hardware, and they are easy to replace on your own. They are often installed using a single screw. Knobs will come in different sizes and shapes and are made from various materials like ceramic, marble, glass, crystal, zinc, stone, brass, stainless steel and more. There are common shapes such as birdcage, round and square. There are also plenty of novelty pulls that you can pick from, so you are able to add an element of your personality to the kitchen.

Pros for picking Knobs:

  • You have many options. You will have almost endless options for knobs. You can pick something luxurious to accent an elegant, formal kitchen of something economical. Small or large, wood, or colorful, square or round, there will be an option. You can get detailed and personal when you pick a knob for your kitchen.
  • Knobs are a bit cheaper. You can purchase a knob for lower than a pull. High end knobs will cost a bit more, but if you are looking for economical, then you will find plenty of inexpensive knobs.
  • Knobs are really easy to install. You can install them in minutes and they will transform your kitchen. They are put on using a single screw, so you just have to unscrew the old knob and put the new one on.
  • Round knobs will never be crooked. Knows that are attached by screws, and screws can get lose over time. If you pick a round knob, then it will always be centered. Novelty knobs, knobs that aren’t round, square knobs can lose the center and look like they are unbalanced when the screw becomes loose. However, it isn’t a hard problem to fix, it just can be annoying to see them in our kitchen which is why many people stick to round knobs. There are knob brands that have brads at the base that will stick to the cabinet to prevent it from rotating.

Cons for picking knobs:

  • They can be hard to clean. If you pick a novelty knob, or highly embellished knobs they could be hard to clean. Messy hands, grease splatters, and occasional spills will happen. But adding personalized knobs will add flair to the kitchen, but if you aren’t able to keep them clean easily, then you may replace them sooner than later.
  • Knobs are hard to grab. Whenever you compare a knob to pulls, a knob is harder to grab on to and pull on. If a person has a disability or arthritis, then it can be an issue.
  • Some knobs can catch on clothing. Although a pull that extends can catch clothing, knobs can do it too. Depending on the location, shape and size of the knob, it can catch on clothing and become annoying.

Everything to know about Pulls

Pulls are easy to install and they usually take more than 1 screw. Most pulls will require 2 screws and similar to knobs, there are multiple options. The most common pulls will include:

  • Birdcage
  • Ring pulls
  • Bar pulls
  • Bail/drop handle pull
  • Arch pulls
  • Bin pulls/ cup pulls

There are a lot of lengths available, but the common one is 3 to 4 inches. Length is vital because if it is too small, the cabinet will be overpowering. This can be a problem with heavy appliance doors. If you are using a small pull, it could warp over time. If it is too large, it can be overwhelming. You can mark your cabinets with painter’s tape to find the length you want.

Choosing what is best for kitchen

Which is better a pull or a knob? There isn’t a definite answer. It is based on your personal preference and the elements of your kitchen. You should give extra thought to function and make the choice for your needs. You will often find that a combination of pulls and knobs work best, so there isn’t a lack of options and variety to pick from. And if you need quality drawer boxes for your new kitchen or replacement drawer boxes Drawer Connection has everything you need! You can buy replacement knobs and pulls at MKRemodeling.com.

What Is Melamine Wood?

If you’re searching “what is melamine wood?” you might be looking for new cabinets or melamine cabinet drawers, or you may be looking at plates, flooring, or even dry erase boards.  Melamine is a laminate product that is a common hard resin overlay which is heat applied to plywood or MDF.  It is a highly durable thermosetting plastic which starts as an organic compound which is combined with formaldehyde.

Laminate vs. Melamine

Melamine is type of laminate, yet not all laminates are made from melamine. A laminate is the description of a product where a layer, or laminate, is applied over a substrate such as plywood or MDF.  Melamine laminates are constructed by molding a formaldehyde/melamine combination into a sheet of durable plastic.  Melamine is fabricated through a process of applying a pressure of about 300 to 500 lbs per square inch.  This pressure makes melamine a lower pressure laminate, or LPL.  Formica is another type of laminate which is formed using much higher pressure, a whopping 1,400 lbs per square inch.

Melamine Benefits For Building

Melamine when installed correctly is a long lasting, inexpensive, and durable option.  While melamine is waterproof if it is installed poorly water may get into the inner wood, causing the melamine to warp.  The durability of melamine makes it a favorite, but if installed poorly there is a chance of it chipping.

  • Wide Selection – Melamine is produced in an incredibly wide variety of finishes and colors.
  • Great Durability – Melamine is waterproof, shatter and scratch resistant.
  • Easy On Budget – Melamine covers less expensive wood products like MDF or plywood.

What Is Made From Melamine?

Melamine is widely used product in a number of industries.  It is used in kitchen cabinetry, display counters, office furniture, dry erase boards, and even flatware like dishes and bowls.  Melamine has become a popular building material as it gives otherwise lower quality materials an attractive and durable finish.  While most of us would prefer solid wood cabinetry Melamine offers a much more budget friendly option which is lightweight, convenient, and a cost effective decision.

How Melamine Is Made

A special type of craft paper which does not get soggy or tear even when it is saturated is soaked in a resin called phenol.  The resin absorbs into the paper and then goes into a drying oven to cure.  The paper is then winded into a roll.  At this point solid color or decorative layer melamine is separated into two process lines.  Solid color melamine is then coated with additional resin while melamine which will have printed designs is combined with an overlay of melamine.

Under Pressure & Heat

Once these products are ready they are sent to a press.  As the laminate sections are laid in the press a metal sheet is set between them to prevent the layers from sticking to each other. Under high heat and pressure the sheets of decorative laminate and the saturated melamine craft paper are made into laminated sheets of melamine.  The metal sheets that are set in as the layers are stacked before pressing may contain designs of wood grain or stone texturing.  After the press the laminate layers are completely cured.  The finishing line trims and sands the sheets to ensure proper adhesion when combined with the MDF or plywood substrates.

Compound laminates are made from stacking thick sections of black laminate along with craft paper and 2 decorative layers. Compound laminates are so thick that they are used without the addition of plywood or MDF to provide structural support.

Melamine Cabinet Drawers

If you are a homeowner or cabinetry company looking for melamine cabinet drawers, Drawer Connection is here to help!  We off affordable melamine cabinet drawers, high quality, and fast turnarounds.  Let our shop take care of the drawer boxes while you focus on the rest of the cabinetry and doing installs.  Homeowners are also welcome to place orders for replacement melamine cabinet drawers.

Shop: Melamine Dovetail Cabinet Drawers

Shop: Melamine Dowel Cabinet Drawers

How To Build A Drawer Box

Are you looking for information on “How To Build A Drawer Box” or how to “Build Your Own Drawers“? Well, we put together a pretty solid guide that should show you step by step how to build your own drawer box at home.

With many DIYer’s, the terms “drawer dados” or “drawer dovetails” is enough to end them running off. However, there are simpler ways to create a drawer without the use of a router or table saw, while still ending with a beautiful and sturdy product. Are you stressed over fasteners being visible? Our design hides them in a clever way so they are not visible, giving a sturdy appearance. Keep reading to learn how you can build a drawer of any size quickly, and simply.

Required Time: 1 hour 30 Minutes

Difficulty Level: Pocket hole joinery and square cuts make this project easy and comfortable for beginners.

Step-by-Step Instructions

Follow these step by step instructions for how to build a drawer box.  Tools will be required for some steps such as saws, drills, and other hand tools.

  1. Cutting parts

By using the cut list and a miter saw, cut the 1×3, 1×6 and square dowels to the correct size. Mark the cut lines on the plywood’s face with a framing square. Position painter’s tape on the cut lines, if necessary mark again. By using painter’s tape, it helps prevent splintering plywood when cutting. Using a circular saw, cut along the lines. Then, sand the cut edges lightly to remove any burrs from around all parts.

  1. Drilling Pocket Holes

Place from and back pieces of the 1×3 on your work surface. Then, with the use of a Kreg Jig drill out two pocket holes, one on either end of the boards.

  1. Drilling Drawer Face Holes

Position the 1×6 drawer ace on your work surface, pocket holes should face downwards. Then, use your tape measure with a pencil for making two marks located 4-inches from each end of your board, and center its width. You will create two pilot holes with a Drill/Driver, which are used later on for attaching your drawer face.

  1. Adding Cleats to Front and Back Pieces

On the 1×3 piece, you will position an 18-inch cleat on both the front and back to be flush with the ends and bottom edges. Then, you will apply wood glue to the cleat with a bead pattern. Once you reposition it, you will need to nail it using a pneumatic nail gun with ¾-inch finishing nails to keep it in place.

  1. Attaching Cleats on the 1×3 Side Pieces

Remaining cleats should be placed on the 16-inch sides to be centered on the length, while flush with bottom edges. Doing this should create a 1 1/8-inch inset on either end of the cleats. Mark each end of the cleats using a pencil. Cleats should be removed, bead of wood glue applied, and position them in place again. Cleats then get secured with a pneumatic nail gun using ¾-inch finishing nails.

  1. Dry fit Sides

You should set the 1×3 boards upright so cleats are running along the bottom edge. Then, the front and back pieces should have glue applied, positioning them between the sides to be flush with each end.

  1. Assembling Sides

As we are not using fancy tools in this guide, we will use a basic method to hold the square joints for the assembling process. Position a block in the corner, ensuring it is an exact square. Then, clamping it to each side, make sure it is tight. This assists in holding piece in the correct position when inserting and driving the 1 ¼-inch pocket screws into the pocket holes and adjoining each side. When each of the four corners have been assembled, check that the assembly is square, then recheck with a framing or speed square. Measure corner to corner.

  1. Inserting Plywood Base

Place a bead of wood glue on the upper edge of every cleat. Place the plywood on the inside of the frame, ensuring they are on the cleats.

Tip: After painting or staining drawers, running a small clear caulking bead along the edge of your plywood base can help with keeping dust from getting between the 1×3 boards and plywood. In addition, if you plan to place heavy objects in the drawer, you should consider using 1/2-inch plywood.

  1. Attaching Drawer Face

On the 1×6 face, center the front of your drawer. Based on the application used, you should let the drawer face hang under the drawer box. Then, mark the position the drawer is hanging on to the 1×6. Remove the drawer, applying wood glue in the marked space, reposition your drawer. With a Drill/Driver drive in the 1-inch wood screws using your pilot hole in the front drawer and backside of your 1×6 drawer face.

Tip: To achieve a perfect fit, it is best if you completely install the drawer box prior to positioning and attaching the drawer face.

Buy Drawer Boxes Online

If you don’t have the time, tools, or woodworking skills to build your own drawer boxes but need drawer box replacements for your kitchen or bathroom DC Drawers is happy to build the replacement for you.  Simply take measurements for how wide, high, and deep you need the new drawer box to be and we will fabricate your replacement drawer box and ship it to you.  If you have any questions about how to measure for your replacement or would like to place your order by phone please call 877-917-4887.

The Best Replacement For Unfinished Kitchen Cabinet Doors – For The Lowest Cost

The best cabinet doors are available online and are easy to find.

Simply ask yourself the following questions:

Which would I come more near finding superior quality from, a cabinet door factory or someone who makes cabinets doors on the side, as a hobby?

  1. Which would I expect better quality from, a factory that has invested, perhaps millions in to their machinery or someone that has put a lot less in to it?
  2. Which do I think pays the most for their lumber, someone who buys it by the truck loads or a small supplier?
  3. Which one do I think would demand more of a quality lumber, someone who gets it by the truck loads or an individual customer?
  4. Do I actually feel that a larger cabinet door manufacturer is going to utilize the economy and scale towards a lower cost going by volume when purchasing, with their increasing productivity being automated and computerized machinery?
  5. Would it be safe to say that with all the overhead cost, a larger cabinet door manufacturer will also offer lower prices?

If you have answered ‘Yes’ to the questions above, then you should know that there are several sources that can be found online, sources that can and will, be able to save you anywhere between thirty and fifty percent on all your replacement cabinet doors.

After determining that you do have a choice, and not just with retail hardware stores, but that you have a choice of purchasing between the retail store and the manufacturer themselves. Which means that you have the choice of buying your replacement cabinet doors online, straight from the manufacturer that supplied the retail store in the first place.

Do this: Visit your hardware stores and note the prices they are charging. Now, go online and compare those unfinished kitchen cabinet door prices to the one’s you find straight from the manufacturer, the one’s that supplied those retail stores. You do the math; I think the amount you could save will shock you.

What Are Melamine Cabinets?

What Are Melamine Cabinets

If you’re searching google for “What Are Melamine Cabinets?“, we have the answer.  Melamine is a great option for budget-conscious homeowners who want to have highly durable and easy to clean kitchen cabinets and cabinet drawers.

Melamine is fabricated by heat-sealing a substrate between paper which has been saturated with thermally fused melamine resin. The substrate can be plywood, MDF, or pressed wood. Thermally fused melamine is a mixture of formaldehyde and melamine which is fused into larger and safer molecules.

What Is Melamine Board

Melamine is used in various industries and because of that there are different chemical make ups. For example when chemists are talking about melamine they are talking about Cyanuramide. In this form the material is considered harmful if ingested.

In contrast the melamine used to create melamine kitchen cabinets and melamine cabinet drawers are made from thermally fused melamine (TFM). These products are manufactured using formaldehyde, yet are constructed to be safe through the combination of the melamine resin and the formaldehyde. This blending of chemical make ups results in larger molecules and neutralizes the potentially harmful characteristics of formaldehyde.

This makes melamine board safe for installation in kitchens, bathrooms, and even safe for the woodworkers who construct cabinet elements to size for our cabinetry projects.

Melamine’s Design Flexibility

TFM is a thermally bonded surface material which covers medium density fiberboard, plywood, or pressed wood. Before the TFM is used to encase the substrate it can be printed with any design or color desired. This makes Melamine a highly desirable option for cabinetry projects for homes or commercial properties.

Re-modelers, kitchen designers, and savvy homeowners love the wide variety of colors that can be ordered. This highly customizable characteristic of melamine allows an incredible level of unique design.

The Melamine Pros & Cons

Understanding what Melamine is made from, that it is safe to build with, and the other characteristics of Melamine helps equip designers and homeowners alike to make the best decisions for their cabinetry projects.

A Safe Building Material

Melamine or TFM is safe to work with and install in our kitchens and bathrooms. The material is produced with formaldehyde, yet because of the way it is bonded with the melamine resin it is not harmful.

Made From Sustainable Sources

The substrate melamine is thermally fused to is sourced from recycled wood scraps and sustainable-growth forests.  Melamine is usually made from products which use pressed board, medium density fiberboard or plywood. This means that the production of melamine cabinets and melamine cabinet drawers does not rely solely on freshly cut lumber, as is the case for solid wood.

More Affordable Cabinetry

Melamine cabinets and cabinet drawers are less costly to make when compared to solid wood alternatives.  This means that designers can offer homeowners more for their money.  Flexibility in choice means that budget can be used for fixtures and other ornamental embellishments.

Melamine Drawbacks

There is no perfect building material. Wood costs more but is lighter and holds screws better. Melamine will not split like wood, but it can shatter with enough blunt force. When this happens rough wood substrate is exposed. The substrate is also highly absorbent and will expand and warp when it gets wet. These issues can be mitigated by using melamine which has quality substrates like custom graded MDF cores. High quality MDF core melamine provides better anchoring for screws and fasteners used to install cabinet doors.

Melamine Can Be Repaired

Life happens and so does damage to kitchen cabinets.  Thankfully melamine can be repaired, re-glued, and otherwise reconditioned to look like new. Sections that are peeling can be glued back down or like-colored wood filler can be used to fix areas that chip or large breaks.

Choosing Melamine For Your Kitchen

Melamine is designed to as an affordable, easy to clean, and attractive option for homeowners. Being able to get a kitchen or bathroom which is beautifully finished with a wide variety of colors for less than solid wood is an attractive option for many designers and homeowners. This makes choosing higher quality appliances or counter-tops a more affordable option.  Melamine is a hugely popular building material for both melamine cabinet and melamine cabinet drawer boxes.

Stay tuned for more from the expert drawer box manufacturers at DCDrawers.com

How To Replace Kitchen Drawers

How To Replace Kitchen Drawers

Are you searching for “How To Replace Kitchen Drawers” because you have a broken drawer in your kitchen? Well, accidents happen and parts of our homes wear out, the drawers in our kitchens are no different. When they break it can be frustrating to lose the storage space and an eyesore having an open gap.

Some “quick-and-dirty” handymen will do things like nail or glue the drawer front back in place and just forget there ever was a drawer, perhaps to make a tee time or get back to watching TV. Learning how to replace kitchen drawers need not be a painful project, let us show you how here.

How To Replace Kitchen Drawers

Use this step by step guide to learn how to replace kitchen drawers and where to buy replacement drawer boxes:

1. Measure The Replacement

To get started you will need to know the size of the replacement you need. Get the height, width, and depth of the opening for the replacement drawer.  Take off an inch for your height and width measurements and at minimum of a half inch from the depth which will allow for easy fitting and drawer slides.

2. Build or Buy a Replacement Drawer Box

Drawer boxes are typically custom built for each kitchen so heading down to the local Walmart to pick up a replacement isn’t an option. To get a replacement that will work you will either need to build a replacement, have a friend do it, or order a drawer box from a professional.

Custom made cheap replacement cabinet drawers can be made in your choice of material, using either dovetail joints or dowel joints, in exactly the size you need.  A replacement drawer box measuring 18” wide by 20” deep by 4” high costs less than $30 dollars from Drawer Connection.

3. Buying Drawer Slides To Match

The next step is making sure you have drawer slides that match your drawer box depth. You can choose from inexpensive roller slides to ball bearing slides that have soft close and smooth opening features. Most homeowners prefer buying the bottom-mount style drawer slides as they have a piece which wraps around the lower edges of the drawer box and makes for easier installation. There are cases where old hardware from the slides is still intact and can be reused, but many homeowners prefer starting fresh when repairing their cabinet drawers.

4. Prepping The Work Area

Depending on why the drawer broke, and how quick and dirty the repairs where you might have very little work, or a lot of work to do here. If there is any broken wood or hardware it should be removed and replaced. This can mean any glue that was used as a band-aid to hold the drawer front on the face of the cabinets, or it can mean removing and replacing broken or splintered wood inside your cabinets to have a solid area to secure your new drawer.  For glues you can try heating the adhesive up with a blow dryer or you can simply use a scraper to work the glue off and then sand & repaint the area.

5. Installing The New Drawer Box

Once your drawer box arrives, you will want to wait to attach the drawer front until the drawer box is installed and sliding back and forth correctly.  It can be a bit tricky to align the drawer front right, using double-sided tape to tack the pieces together saves time and effort. When installing the drawer ensure that the gaps on the top, bottom, and sides are equal. Once you are sure the box is installed right you can use at least 2 screws to secure the drawer front to the drawer box, from the inside of the drawer.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.

Choosing Drawer Slides Guide

Choosing Drawer Slides Guide

If you are searching for “Choosing Drawer Slides Guide” you are most likely updating your kitchen or if you are just simply putting in new cabinetry. With all of the different options for slides it can end up being a ghastly task. This guide is meant to simplify the options and help you understand what is available so you can get the best bang for your buck.

So, how do you choose from all of the different options out there?

The following is an introduction to characteristic basics to slides, including several features that are offered and their benefits to many of the types of slides out there. If you first take into consideration what it is you are wanting from each category, it is going to help to streamline any further searching.

A tutorial on how to choose the correct drawer slide mount:

 You will first need to figure out whether you are wanting a side mount, center mount, or an under mount slides. Your decision will depend on the amount of space you have in between the drawer box and your cabinet opening.

  • Side-mount slides – these come in pairs (or sets), and it comes with the slide that attaches to both sides of the drawer.
  • They are available with a ball-bearing and a roller mechanism.
  • They usually will require a clearance of 1/2” in between drawer slides and the side of cabinet opening.
  • Center-mount slides – these come as single slides and they mount under the drawers’ center.
  • They are available in a classic wood version, and they are also available with a ball-bearing mechanism.
  • Its clearance will depend on the slides thickness.
  • Under-mount slides – these are the ball-bearing slides and they come in pairs or sets. They mount to the cabinets sides and also connect to devices that lock that are attached to the drawers under side.
  • These are not able to be seen when the drawer is open, which make them a better choice to highlight one’s cabinetry.
  • These require less of a clearance in between the sides of the drawer and the opening of the cabinet, which is usually about 3/16” to 1/4” on; each side.
  • These do require a specific top and bottom clearance for the opening of the cabinet, typically, drawer sides should not be over 5/8” in thickness.
  • The space between the drawer bottom’s underside and the drawer sides themselves has to be 1/2”.

A tutorial on drawer slides and mounting types –  and also a tutorial on drawer slides and ball-bearing vs. roller style of the slide mechanism slide length: 

  • Determine the length of slide needed.
  • The slides that are used the most will come in sizes that range between 10” and 28”. Although, special applications are available in shorter or longer slides.
  • You will measure the side-mount and the center-mount slides for distance from the cabinet’s front edge, to the inside-face of the cabinet’s back, now subtract 1”.
  • You will measure the length of the drawer for the under-mount slides. The drawers and the slides have to be the same length in order to work correctly. 

Extension: 

First you will need to know how far out you want the drawer to come out when it is opened. 

Tutorial on drawer slide – Drawer extension:

Weight rating 

Consider what it is the drawer will be holding.

Generally, slides are rated for the amount of 75,100 and 150 pounds, although, there are some that are rated at a less amount, as well as some that are specialty slides that can handle up to 220 pounds.

Weight rating is significantly important when it comes to choosing slides when it is for applications that are heavy duty, like file drawers and pantry pull outs.

Tutorial on drawer slide – weight rating, lengths, and the finishing options an, color: 

  • Is there a certain color that you are looking for?
  • Slides mostly come with a zinc finish.
  • Also available in black is the center-line Life-time Series 757 (which are nice for entertainment centers).
  • Available in white or brown are the Blum Self-Closing Epoxy Roller-slides

Motion: 

You will also need to decide if you are wanting the special motion features. 

  • Push to open – It only takes a nudge to open this type of slide, so there is no need for knobs or handles. A great option for today’s modern kitchens, and in places that hardware is not wanted. 
  • Self-close – When drawers are given a push the slides will return the drawer into the cabinet.
  • Soft-close – These slides will also add an effect of dampening to the feature of self-closing drawers, and return the drawer back into the cabinet gently, without ever slamming it.

Nationwide Drawer Slide Supplier

If you have broken drawer slides, are starting a new cabinetry project, or are simply remodeling your kitchen or bathroom Drawer Connection has the best selection of drawer slides. We have soft close, push to open, self close, and many more quality options that keep your drawers opening and closing smoothly. Visit our site to get started or call us at 877-917-4887.

Best Way to Organize Kitchen Cabinets & Drawers

Best Way to Organize Kitchen Cabinets & Drawers

Organizing experts have offered expertise for organizing storage and your kitchen.

Your kitchen is the most used part of your home, if it were organized and simpler to use, your life would be a lot easier. Professional organizers suggest these simple steps to organize your kitchen and make your life flow easier when it comes to preparing meals.

Empty your cabinets

Pull everything out of your cabinets and go through it. Donate or discard things that aren’t used all the time, duplicated items, broken things, or things that you forgot you even had. Do this with every drawer and cabinet, setting up different areas on the floor for every group. Be ruthless as most kitchens are short on storage space the goal is to only have things that you use and love.

Group like items

Once the cabinets are empty, you should consider what is best in terms of how to group items. Sort out the baking items and put them together. Sort cooking items and put them together. Group dishes you eat from, holiday, glassware, and other seasonal items that get used for special serving or entertaining pieces.

Organize the cabinets

Now that everything is grouped, decide where everything should be stored. Baking and cooking pieces need to be kept close to where the food is prepared. Utensils need to be in a drawer closest to the preparation area. Glassware needs to be close to the sink or fridge. Create a tea or coffee station that has mugs, filters, sugar and put it next to a water source. This way you can avoid having to cross the kitchen for what you need to make your morning beverages.

Use clear containers to store items

Using clear containers to place inside of cabinets. Group things like gravy mixes, sauce packets, hot cereal packets, hot cocoa and put them in clear containers to keep them from being scattered everywhere. Use clear plastic shoeboxes to store food like jello or pudding mixes.

Store containers and lids together

Get rid of containers that don’t have lids and store the other containers with the lids on them or store the lids in a large container so that they stay together. You can do this with pot and pan lids. A large clear box will help to keep them together. You could also put them on their sides in a wire rack.

Make use of vertical space

Place hooks under cabinets to hold your coffee mugs above a counter or to hang stemware racks in the same spot of wineglasses. This will free up cabinet space. You could also use adhesive hooks on the pantry or cabinet doors to hold tools like measuring cups, kitchen gadgets or oven mitts. You should consider using wall space or ceiling racks to hand pans and pots. Keep in mind that any space that you hang something up will free up cabinet space.

Lazy Susans

Rotating trays can be used to hold things like cooking ingredients as well as medications and more. You can use lazy Susan’s in your fridge as well, so that nothing hides in the back to freeze and spoil.

Use drawer dividers

Drawer dividers are perfect for cooking utensil drawers or junk drawers. Everyone needs a place to keep those little random things, but they don’t have to be junked up and overflowing. Drawer dividers will let you assign spots for things, and you will be able to find them when you need it.

Sort papers

Get a sorter box that you can hang on the fridge for takeout menus, notepad/pen, coupons, and other types of papers that are on counter-tops. Each paper type should have its own section in the sorter.

Clean out your fridge

Keep you trash bags near your trash can and throw a stack of loose bags in the bottom of the can. That way when you pull one bag out, there is another one ready to go. If you need to put out the garbage once a week, use that time to clean out the fridge every week. See what foods need to be thrown away, and throw it out and then take your trash to the curb then. Your fridge will only have current items and will be less cluttered and it just takes a few minutes.

The personal work style that you have will say where you store and use items in your kitchen, but the goal is to make that room and the contents serve the needs you have efficiently and smoothly. If you simply invest the energy and time to decluttering and organizing the kitchen, then it will be an investment that pays off in happiness for years.

Kitchen Organization Starts With Good Drawers

If you want to make the best of your kitchen organization good drawer inserts and slide out shelves are the key to making your space work for you. Being able to slide your shelves out and reach the back with nearly no effort makes it so you can have a place for everything, and everything in it’s place. Contact the drawer box experts for more information.